<form id="xri3z"><th id="xri3z"></th></form>

              保定漆彩建筑裝飾工程有限公司
              ?

              資訊分類

              更多

              產品分類

              更多

              最新資訊

              更多
              地址:河北省保定市順平縣永平大街118號
              郵箱:40423960@qq.com
              電話:15081222333 0312-7615081
              傳真:0312-7655558

              新聞中心

              當前位置:首頁 > 新聞中心 > 導致保定環氧地坪漆失光的原因及預防

              導致保定環氧地坪漆失光的原因及預防

              2021-10-19

              保定環氧地坪漆的主要成分是環氧樹脂,由于環氧樹脂自身的分子結構,使其有必要要和固化劑發作反應以后才干構成不溶、不熔的高聚物,即保定環氧地坪漆。在施工過程中,添加劑的運用準確與否以及環境要素等,都會對環氧樹脂的特性發作一定的影響,因此保定環氧地坪漆在施工的過程中總是會呈現這么或那樣的疑問,其中就包括保定環氧地坪漆失光的疑問。保定環氧地坪漆失光后,會嚴重影響保定環氧地坪的外觀及質量,所以咱們應該嚴加防范。那么,導致保定環氧地坪漆失光的因素有哪些呢?咱們又該怎樣去避免呢?

              The main component of epoxy floor paint is epoxy resin. Because of the molecular structure of epoxy resin, it is necessary to react with curing agent to form insoluble and insoluble polymer, namely epoxy floor paint. In the construction process, the use of additives and environmental factors, will have a certain impact on the characteristics of epoxy resin attack, so epoxy floor paint in the construction process will always present such or such questions, including epoxy floor paint matting question. Epoxy floor paint will seriously affect the appearance and quality of the epoxy floor, so we should take strict precautions. What are the factors leading to the loss of light of epoxy floor paint? How should we avoid it?

              以下小編將為大家具體介紹。 1、施工場所濕度太大(相對濕度超越85%),揮發性漆的涂膜輕易吸收水分而發白發光。避免:施工場所的濕度不宜過大。 2、施工中稀釋劑用量過多或參加了火油一類的高沸點稀釋劑。避免:稀釋劑用量不宜過多,應避免火油一類的高沸點溶劑的參加。 3、物面處理不潔凈,富含酸、堿、油污、蠟質和水分等。這就要求咱們施工前,被涂物外表應充分處理潔凈。 4、漆中顏料的水分含量過高或施工中混入水分。避免:應控制顏料的含水量,施工中避免混入水分。 5、被涂物外表過火粗拙或多孔,未涂封閉底漆會發作環氧保定環氧地坪失光景象。此種因素導致的環氧保定環氧地坪漆失光就需要咱們物面運用底漆封閉,膩子填平,打磨。 6、涂膜未徹底干透之前遇雨水或露珠。避免:涂膜在枯燥過程中要避免雨水或露珠滋潤。 7、涂膜軟,耐劃傷機能欠好。避免:按被涂物的運用條件,選用耐候性、抗劃傷機能杰出的涂料。

              The following Xiaobian will give you a detailed introduction. 1. The humidity of the construction site is too high (relative humidity exceeds 85%). The film of the volatile paint absorbs moisture easily and glows white. Avoid: humidity of construction site should not be too large. 2. The high boiling point diluent used in the construction is too much amount of diluent or participated in the category of kerosene. Avoid: the amount of diluent should not be excessive. We should avoid the participation of high boiling point solvents such as kerosene. 3, the surface treatment is unclean, rich in acid, alkali, oil, wax and moisture. This requires that before construction, the appearance of the coating should be fully treated and cleaned. 4. The moisture content in the paint is too high or the moisture is mixed in the construction. Avoid: control the moisture content of pigment and avoid mixing moisture in construction. 5, the coating is too rough or porous, and no coating primer will happen. This factor leads to the loss of gloss of epoxy floor paint requires us to use primer sealing, putty filling, polishing. 6, before the film is thoroughly dried, rain or dew will appear. Avoid: the film should be moistened during the drying process to avoid rain or dew. 7, the film is soft, scratch resistant function is not good. Avoid: according to the application conditions of coated materials, selec weather resistant, excellent scratch resistant coatings. 


              標簽:   保定環氧地坪 地坪 保定環氧地坪漆 保定環氧地坪施工 保定保定環氧地坪
              卡通动漫第48页综合,欧美日韩亚洲中字国产,国产在线不卡一区二区,国产网爆抖音在线观看,亚洲 欧洲 日产,福利明星换脸范冰冰,国产自产对白一区